2.5 Wiring
2-29
Preparation
●
Output
PMU1A
(Electric
power)
PMU2A
(Power
two-system)
EMU8A
(Pulse/temperature)
CTD8E
(CT
expansion)
○
○
○
○
O: With output
Setting output terminals can perform alarm output, total power consumption pulse output, and
3-STATE output.
The output terminals are as follows.
[PMU1A (electric power), PMU2A (power-2 system), EMU8A (pulse/temperature)]
Three transistor output points exist.
[3] Terminal numbers (COM) are common.
[CTD8E (CT expansion)]
One relay output point exists.
* For the output terminal functions, refer to Page 3-9.
●
Event input
PMU1A
(Electric
power)
PMU2A
(Power
two-system)
EMU8A
(Pulse/temperature)
CTD8E
(CT
expansion)
× ×
○
×
O: With input, X: Without input
Using event input requires a combination of PMU1A (electric power), PMU2A (power-2 system),
and EMU8A (pulse/temperature).
To use event inputs, make connections between terminal [9] and [10], [11] and [12], [13] and
[14], [15] and [16], [17] and [18], [19] and [20], and [21] and [22] in EMU8A (pulse/temperature).
For the event input, either Without voltage or With voltage is settable.
Input without voltage (NPN)
Input with voltage (PNP)
*
For the event input, refer to Page 3-16.
イベント入力
1
9
10
イベント入力
1
9
10
OUT1
3
4
OUT1
3
4
OUT2
3
5
OUT3
3
6
Event input 1
Event input 1
