Omron K6PM-TH, User Manual

Page: 39 / 198

2 - 3
2 Installation and Wiring
K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
2-2 In
stal
latio
n
2
2-
2-1 Pr
eca
utions at In
stalla
tion
2-2 Installation
This section describes the installation of the Main Unit and the infrared thermal sensors.
Refer to the Precautions for Safe Use on page 6.
For installation of the Main Unit, it is possible to install it on the DIN rail or install it with screws on the
wall.
Screw the DIN Track in three or more places in a control cabinet.
 Recommended DIN Track

PFP-M End Plate (2 Pieces)
 Installation Direction
There is no particular restriction on the mounting direction of the Main Unit, but install it securely in
the horizontal or vertical direction as much as possible.
2-2-1 Precautions at Installation
2-2-2 Installing the Main Unit
When Installing on DIN Track
Model Dimensions Manufacturer
PFP-100N 1,000 mm OMRON
PFP-50N 500 mm