![background image](http://html1.mh-extra.com/html/omron/k6pm-th/k6pm-th_user-manual_743374194.webp)
Appendices
A - 38
K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
A-4-2
Additional Status When General Status Is 01 hex
General
Status
(hex)
Additional
Status
(hex)
Explanation
01
0100
Connection in Use or Duplicate Forward Open.
01
0103
Transport Class and Trigger combination not supported.
01
0106
Ownership Conflict.
01
0107
Connection not found at target application.
01
0108
Invalid Connection Type. Indicates a problem with either the Connection Type or Prior-
ity of the Connection.
01
0109
Invalid Connection Size.
01
0110
Device not configured.
01
0111
RPI not supported. May also indicate problem with connection time-out multiplier, or
production inhibit time.
01
0113
Connection Manager cannot support any more connections.
01
0114
Either the Vendor Id or the Product Code in the key segment did not match the device.
01
0115
Product Type in the key segment did not match the device.
01
0116
Major or Minor Revision information in the key segment did not match the device.
01
0117
Invalid Connection Point.
01
0118
Invalid Configuration Format.
01
0119
Connection request fails since there is no controlling connection currently open.
01
011A
Target Application cannot support any more connections.
01
011B
RPI is smaller than the Production Inhibit Time.
01
0203
Connection cannot be closed since the connection has timed out.
01
0204
Unconnected_Send timed out waiting for a response.
01
0205
Parameter Error in Unconnected_Send Service.
01
0206
Message too large for Unconnected message service.
01
0207
Unconnected acknowledge without reply.
01
0301
No buffer memory available.
01
0302
Network Bandwidth not available for data.
01
0303
No Tag filters available.
01
0304
Not Configured to send real-time data.
01
0311
Port specified in Port Segment Not Available.
01
0312
Link Address specified in Port Segment Not Available.
01
0315
Invalid Segment Type or Segment Value in Path.
01
0316
Path and Connection not equal in close.
01
0317
Either the segment is not present or the encoded value in the network segment is
invalid. Either the segment is not present or the encoded value in the network segment
is invalid.
01
0318
Link Address to Self Invalid.
01
0319
Resources on Secondary Unavailable.
01
031A
Connection already established.
01
031B
Direct connection already established.
01
031C
Miscellaneous.
01
031D
Redundant connection mismatch.
01
031E
There are no more available reception resources in the sending module.
01
031F
No connection resources exist for target path.
01
0320- 07FF unused.
Summary of Contents for K6PM-TH
