Omron K6PM-TH, User Manual

Page: 189 / 198

A - 33
Appendices
K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
A
-3 T
ag D
at
a
L
in
k
C
o
nn
ec
ti
o
n Se
tti
ng
Pro
c
ed
ur
es
A
A-3-
3 Using
the NJ/NX-series
(3)-2 Adding K6PM Devices to the Network
Click the (Add Target Device) Button in the Toolbox on the right of the EtherNet/IP Con-
nection Setting Tab Page.
As shown in the following example, enter the node address (IP address), and from the
pull-down list, select the model and revision.
Click the Add Button at the bottom of the toolbox. The K6PM device will be added as a tar-
get device.
(4) Editing tag set
Map the K6PM Input data to the memory area of the PLC using the EtherNet/IP tag data
link by associating the network variable (input) of the PLC with the tag used in the network.
As a method of editing the tag set, there is a method of registering all tag sets, and a
method of individual registering by right-clicking and selecting Create New Tag Set. Here,
the method of registering is described.
(4)-1 Open Tag Set Registration Setting Dialog Box
Click the Registration All Button in the Tag Set Pane, a list of network-published global
variables will be displayed. In this example, only "K6PM_THM_Monitor_Data1" to
"K6PM_THM_Monitor_Data4" which was registered as a network variable (input) is dis-
played.
Click Click Click