Omron K6PM-TH, User Manual

Page: 124 / 198

5 Monitoring and Setting with the EtherNet/IP Communications
5 - 22 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
This object reads the Main Unit software reset and the Main Unit identification information, and also
reads the state of the built-in EtherNet/IP port.
Specify 01 hex.
Specify 01 hex.
The attribute ID specifies the information to read.
 Class Attribute ID
The class attribute ID specifies the attribute of the object class.
5-3-7 Identity Object (Class ID: 01 hex)
Service Codes
Service
code
Service name Description
Supported services
Classes Instances
01 hex Get_Attributes_All Reads the values of all attributes. Supported Supported
0E hex Get_Attribute_Single Reads the value of the specified attribute. Supported Supported
05 hex Reset Performs software reset of the Main Unit.
Execute this service code to perform software
reset of the Main Unit when you change the
parameter settings and want to apply the
changed parameters.
Not supported Supported
Class ID
Instance ID
Attribute ID
Attribute ID Parameter name Description Attribute
Data
Data type
Default
value
01 hex Revision Revision of the object Read UINT 0001 hex