Omron K6PM-TH, User Manual

Page: 122 / 198

5 Monitoring and Setting with the EtherNet/IP Communications
5 - 20 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
This object sets the alarm threshold of the Main Unit.
Specify 378 hex.
Specify the following data according to the target.
• For class: Specify 00 hex.
• For instance: Specify 01 to 1F hex (compatible with sensor number 1 to 31).
Specify the information to write.
 Class Attribute ID
None
 Instance Attribute ID
The instance attribute ID specifies the per-instance attribute.
The setting parameter is enabled after the power supply is reset.
An example of a case where the instance ID is 01 hex is described below.
5-3-6 K6PM-TH Sensor Alarm Setting Object (Class ID: 378 hex)
Service Codes
Service
code
Service name Description
Supported services
Classes Instances
01 hex Get_Attributes_All Reads the values of all attributes. Not supported Supported
02 hex Set_Attributes_All Write values to all attributes. Not supported Supported
0E hex Get_Attribute_Single Reads the value of the specified attribute. Not supported Supported
10 hex Set_Attribute_Single Write the value of the specified attribute. Not supported Supported
Class ID
Instance ID
Attribute ID
Attribute ID Parameter name Description Attribute
Data
Data type
Default
value
64 hex Sensor 1
Internal temperature alarm
setting (threshold 1) (0000 to 270F hex)
(0 to 999.9 (unit: °C/°F)) Write UINT 01C2 hex
(45.0)
65 hex Sensor 1
Internal temperature alarm
setting (threshold 2) (0000 to 270F hex)
(0 to 999.9 (unit: °C/°F)) Write UINT 0226 hex
(55.0)
66 hex K6PM-TH sensor 1 seg-
ment 0
Current temperature alarm
setting (threshold 1) (0000 to 270F hex)
(0 to 999.9 (unit: °C/°F)) Write UINT 02BC hex
(70.0)