Omron K6PM-TH, User Manual

Page: 104 / 198

5 Monitoring and Setting with the EtherNet/IP Communications
5 - 2 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
5-1 Outline
This section describes how to monitor the Main Units using the EtherNet/IP.
The Main Units can be monitored from a PLC or PC via EtherNet/IP.
The following two communications methods can be used.
5-1-1 What is Monitoring Using EtherNet/IP?
Communica-
tions method
Outline
For the Main Units
Monitor Settings
Tag data link Multiple data such as measured values can be monitored without
using a communications program. For data that can be monitored,
refer to
5-2 Monitoring Using the Tag Data Link on page 5-4.
Supported Not sup-
ported
CIP message
communications Individual data such as measured values can be read and written
by using communications program. It can also be used during tag
data link. Supported Supported
PC
PLC (supporting EtherNet/IP)
Commercial PC (supporting EtherNet/IP)
Industrial switching hub
Tag data link: monitoring
CIP message communications:
monitoring and setting
CIP message communications:
monitoring and setting
EtherNet/IP
EtherNet/IP port
K6PM-TH