Omron K35-2, User Manual

Page: 64 / 186

Functions and Oper
ations
Section 5 Functions and Operations
5-2
Knowledge Required for Setting Parameters
■
About Levels
Levels are groups of parameters.
Levels for the K3HB are classified as follows:
Important
Depending on the level,
measurements may continue
to be executed or may be
stopped. Check under the
“Measurement operations”
column.
Level Function
Measurement
operations
Protect
Makes settings to prevent inadvertent
key operations. Movement between
levels and changes to settings may be
prohibited, depending on the protect
settings.
Executed
RUN
The normal operation mode where
inputs are read and comparative
judgements are made.
In RUN level, the present value can be
displayed, comparative set values
checked, and forced-zero executed or
cleared.
The K3HB is in RUN mode immediately
after the power is turned ON.
Adjustment
Switches banks and makes settings,
such as communications write settings.
Initial setting
Makes initial settings, such as the input
type, scaling, and comparative output
patterns.
Stopped
Input adjustment Adjusts inputs.
Display
adjustment
Enables/disables comparative set value
displays, and sets the display refresh
periods, display color, and position
meter.
Prescale Sets the prescale bank.
Comparative set
value
Makes comparative set value bank
settings.
Linear output Sets the linear output.
Communications
setting
Sets the baud rate, data length, and
other communications settings.
Output test
Sets test measurement values to
perform output tests.
Advanced
function settings
Used for advanced customization.