Omron K35-2, User Manual

Page: 143 / 186

Functions and Oper
ations
5.31 Copying Bank Prescale Values
5-81
5.31 Copying Bank Prescale Values
The bank copy function is used to specify a bank between 0 and 7 and
copy the group of prescale values in that bank to all banks.
Parameter Setting Procedure
Prescale level
R P C
copy
L
3
(COPY)
3 s min.
A Press the
L
[LEVEL] Key for at least 3 s in RUN level to move to
the initial setting level.
• “
L
0
” is displayed on the level/bank display to indicate the initial
setting level.
B Press the
L
[LEVEL] Key several times to move to the comparative
set value level.
• “
L
3
" is displayed on the level/bank display to indicate the
comparative set value level.
C Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
D Use the
U
[UP] Key to select the bank to be copied from.
E Press the
M
[MODE] Key to switch to the next parameter.
• Change the prescale values AX, AY, BX, and BY as required.
F Press the
M
[MODE] Key several times to change the PV display
to “
copy
.”
G Press the
S
[SHIFT] Key to make the SV display flash.
• The setting can be changed when the SV display starts to
flash.
H Use the
U
[UP] Key to change the SV display to “
on
.”
I Press the
M
[MODE] Key to switch to the next parameter.
• The prescale value from the copy source bank selected in step
D will be copied to all banks.
Displays “L
0
.”
L
0
L
ps. bnk
Displays “L
3
."
0
L
3
L
ps. bnk
0
L
3
S
ps. bnk
1
L
3
U
ps1. ax
1.0000
L
3
M
copy
off
L
3
M
copy
off
L
3
S
copy
on
L
3
U
ps. bnk
1
L
3
M