Omron HEM-7132 User Manual Download

Page: 1 / 1

Year

Month

Day

Hour

Minute

1 to 2 cm

B
C

F
E

P
Q

R
S

T
U

Thank you for purchasing the OMRON HEM-7132 Automatic Blood Pressure

Monitor.
The OMRON HEM-7132 is a compact, fully automatic blood pressure monitor,

operating on the oscillometric principle. It measures your blood pressure and

pulse rate simply and quickly. For comfortable controlled inflation without the

need of pressure pre-setting or re-inflation the device uses its advanced

“IntelliSense” technology.
Intended Use

This product is designed to measure the blood pressure and pulse rate of

people within the range of the designated arm cuff, following the instructions in

this instruction manual.

It is mainly designed for general household use. Please read the Important

Safety Information in this instruction manual before using the unit.

Please read this instruction manual thoroughly before using the unit.

Please keep for future reference.

For specific information about your own blood pressure, CONSULT YOUR

DOCTOR.

Consult your doctor prior to using in pregnancy or if diagnosed with arrhythmia

or arteriosclerosis.

Please read this section carefully before using the unit.

Warning:

Indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injury.

(General Usage)

• Do not use the device on the injured arm or the arm under medical treatment.

• Do not wrap the arm cuff on the arm while being on a intravenous drip or

blood transfusion.

(AC Adapter (optional) Usage)

• Do not use the AC adapter if the unit or the power cord is damaged. Turn off

the power and unplug the power cord immediately.

• Plug the AC adapter into the appropriate voltage outlet. Do not use a

multiple-tap.

• Never plug in or unplug the power cord from the electric outlet with wet

hands.

Caution:

Indicates a potentially hazardous situation which, if not avoided,

may result in minor or moderate injury to the user or patient or

damage to the equipment or other property.

(General Usage)

• Always consult your doctor. Self-diagnosis of measurement results and

self-treatment are dangerous.

• People with severe blood flow problems, or blood disorders, should consult a

doctor before using the unit, as cuff inflation can cause internal bleeding.

• If there are any abnormalities during the measurement, remove the arm cuff.

• Do not use this device on infants or persons who cannot express their

intentions.

• Do not inflate the arm cuff more than necessary.

• Do not use the unit for any purpose other than measuring blood pressure.

• Use only the approved arm cuff for this unit. Use of other arm cuffs may result

in incorrect measurement results.

• Do not use a mobile phone or other devices that emit electromagnetic fields,

near the unit. This may result in incorrect operation of the unit.

• Do not disassemble the unit or arm cuff.

(Battery Usage)

• Do not insert the batteries with their polarities incorrectly aligned.

• Use only four “AA” alkaline or manganese batteries with this unit. Do not use

other types of batteries. Do not use new and used batteries together.

• Remove the batteries if the unit will not be used for 3 months or more.

(AC Adapter (optional) Usage)

• Fully insert the power plug.

• When disconnecting the power plug, do not pull the power cord. Be sure to

hold the power plug.

• When handling the power cord, observe the following:

Do not damage.

Do not break it.

Do not tamper with it.

Do not forcibly bend or pull.

Do not twist.

Do not bundle during use.

Do not pinch.

Do not place under heavy objects.

• Wipe the dust of the power plug.

• Disconnect the power pl

ug if the product will not be used for a long period of

time.

• Disconnect the power plug before starting maintenance.

• Use only the original AC adapter designed for this unit. Use of unsupported

adapters may damage and/or may be hazardous to the unit.

General Precautions

• Do not forcibly bend the arm cuff or bend the air tube excessively.

• To unplug the air plug, pull on the air plug at the connection with the main unit

not the tube itself.

• Do not apply strong shocks and vibrations to or drop the unit and arm cuff.

• Do not inflate the arm cuff when it is not wrapped around your arm.

• Read and follow the “Important information regarding Electro Magnetic

Compatibility (EMC)” in the Technical Data Section.

• Read and follow the “Correct Disposal of This Product” in

the Technical Data

Section when disposing of the device and any used accessories or optional

parts.

Important Safety Information

Note: Subject to technical modification without prior notice.

Important information regarding Electro Magnetic Compatibility (EMC)

With the increased number of electronic devices such as PC’s and mobile

(cellular) telephones, medical devices in use may be susceptible to

electromagnetic interference from other devices. Electromagnetic interference

may result in incorrect operation of the medical device and create a potentially

unsafe situation.

Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility)

with the aim to prevent unsafe product situations, the EN60601-1-2:2007

standard has been implemented. This standard defines the levels of immunity to

electromagnetic interferences as well as maximum levels of electromagnetic

emissions for medical devices.
This medical device manufactured by OMRON HEALTHCARE conforms to this

EN60601-1-2:2007 standard for both immunity and emissions.

Nevertheless, special precautions need to be observed:

•

Do not use mobile (cellular) telephones and other devices, which generate

strong electrical or electromagnetic fields, near the medical device. This may

result in incorrect operation of the unit and create a potentially unsafe situation.

Recommendation is to keep a minimum distance of 7 m. Verify correct operation

of the device in case the distance is shorter.

Further documentation in accordance with EN60601-1-2:2007 is available at

OMRON HEALTHCARE EUROPE at the address mentioned in this instruction

manual.

Documentation is also available at www.omron-healthcare.com.

This marking shown on the product or its literature, indicates that it

should not be disposed of, with other household wastes at the end

of its working life. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, please separate

this product from other types of wastes and recycle it responsibly to

promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can

return this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions

of the purchase contract. This product should not be mixed with other commercial

wastes for disposal.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

Introduction

1. Overview

Main unit:

N. Average value symbol

O. Memory symbol

P. Irregular heartbeat symbol

Q. Systolic blood pressure

R. Diastolic blood pressure

S. Low battery symbol

T. Cuff wrapping guide

2.1 Installing/Replacing the Batteries

2. Preparation

1.
2.

Remove the battery cover.

2.2 Setting the Date and Time

Press the button.

Set the monitor to the correct date and time before

taking a measurement for the first time.

Press the START/STOP button to store the setting.

Notes:

• If the batteries have been replaced, the date and time setting will

need to be reset.

• If the date and time are not set, “-:--” appears during or after

measurement.

Insert four “AA” batteries

as indicated in the battery

compartment and then

replace the battery cover.

Notes:

• If the

low battery symbol ( ) appears on the display, turn the

monitor off then replace all batteries at the same time.

• The measurement values continue to be stored in memory even after

the batteries are replaced.

• The supplied batteries may have a shorter life.

Disposal of used batteries should be carried out in accordance with the

national regulations for the disposal of batteries.

The bottom edge of the arm

cuff should be 1 to 2 cm

above the elbow. The air

tube is centred on the

middle of your inner arm.

4. Troubleshooting and Maintenance

3.3 Taking a Reading

6. Technical Data

5. Optional Parts

4.1 The Icons and Error Messages

4.2 Troubleshooting

4.3 Maintenance

Problem

3.4 Using the Memory Function

Calibration and Service

To protect your unit from damage, please observe the following:

Cause

Remedy

Notes:

• When you take a measurement on the right

arm, the air tube will be at the side of your

elbow. Be careful not to rest your arm on

the air tube.

Notes:

• To cancel a measurement, press the START/STOP button to release

the air in the arm cuff.

• Remain still while taking a measurement.

Press the START/STOP button.

The arm cuff will start to inflate automatically.

Notes:

• If the previous reading was taken without setting

the date and time, the average value is not

calculated.

• If there are no measurements results stored in

the memory, the screen to the right is displayed.

• Do not subject the main unit and the cuff to extreme

temperatures, humidity, moisture or direct sunlight.

• Do not fold the cuff or tubing tightly.

• Do not inflate the arm cuff over 299 mmHg.

• Do not disassemble the unit.

• Do not subject the unit to strong shocks or vibrations

(for example, dropping the unit on the floor).

• Do not use volatile liquids to clean the main unit.

• Do not wash the arm cuff or immerse it in water.

• Do not use petrol, thinners or similar solvents to clean

the arm cuff.

• Do not carry out repairs of any kind yourself. If a defect

occurs, consult your local OMRON representative.

• The accuracy of this blood pressure monitor has been

carefully tested and is designed for a long service life.

• It is generally recommended to have the unit inspected

every two years to ensure correct functioning and

accuracy. Please consult your local OMRON

representative.

• The unit should be cleaned with a soft, dry cloth.

• Use a soft, moistened cloth and neutral soap to clean

the arm cuff.

Automatic Blood Pressure Monitor

HEM-7132

LCD Digital Display

Oscillometric method

Pressure: 0 to 299 mmHg

Pulse: 40 to 180 beats/ min.

Pressure: ±3 mmHg

Pulse: ±5% of display reading

Fuzzy-logic controlled by electric pump

Automatic pressure release valve

60 Measurements with date and time

DC6V 4W

4 “AA” batteries 1.5V

or AC adapter (optional, INPUT AC100-240V

50/60Hz 0.12A)

Approx. 1000 measurements

(using new alkaline batteries)

= Type BF

Internally powered ME equipment (When using only

the batteries)

= Class II ME equipment (Optional AC adapter)

+10 to +40°C / 30 to 85% RH

-20 to +60°C / 10 to 95% RH / 700-1060 hPa

Approx. 280g without batteries

Approx. 170g

Approx. 107 (w) mm

79 (h) mm × 141(l) mm

Approx. 145 mm × 532 mm

(Cuff: arm circumference 22 to 42 cm)

Nylon, polyester, polyvinyl chloride

Main unit, arm cuff, instruction manual, battery set

3.2 How to Sit Correctly

To take a measurement, you need to be

relaxed and comfortably seated, under

comfortable room temperature. No

bathing, drinking alcohol or caffeine,

smoking, exercising or eating 30 minutes

before taking a measurement.

• Sit on a chair with your feet flat on the floor.

• Sit upright with your back straight.

• The arm cuff should be at the same level as

your heart.

• The blood pressure can differ between the right arm and the left arm,

and therefore also the measured blood pressure values can be

different. OMRON recommends to always use the same arm for

measurement. If the values between both arms differ substantially,

please check with your doctor which arm to use for your

measurement.

Press and hold the button for

more than 3 seconds.

Press and hold the START/STOP

button for more than 3 seconds.

The date/time display will disappear.

Release the START/STOP button when the date/time

display turns off.

The arm cuff will start to inflate automatically.

The monitor automatically stores the result up to 60 sets. It can also

calculate an average reading based on the measurements from the

last three readings taken within 10 minutes. If there are only two

readings in memory for that period, the average will be based on two

readings. If there is one reading in memory for that period, the average

will be based on one reading.

Notes:

• If the memory is full, the monitor will delete the oldest reading.

• When viewing the reading taken without setting the date and time,

“-:--” is displayed instead of the date and time.

The monitor stores measurement values for one user in the memory.

The guest mode can be used to take a single measurement for

another user. No measurement values are stored in the memory when

the guest mode is selected.

Note: Please check with your local OMRON representatives for the

appropriate optional part models.

START

INFLATE

DEFLATE

COMPLETE

The reading is

extremely low (or

high).

The cuff wrapping

guide lamp does not

light.

Arm cuff deflates too

soon.

Arm cuff pressure

does not rise.

Cannot measure or

readings are too low

or too high.

Arm cuff not applied

correctly.

Movement or talking

during measurement.

Clothing is interfering

with the arm cuff.

The air tube is not

securely connected

into the main unit.

Air is leaking from the

arm cuff.

The arm cuff is loose.

The arm cuff has not

been inflated

sufficiently.

Apply the arm cuff

correctly.

Refer to section 3.1.
Remain still and do not

talk during

measurement.

Refer to section 3.3.
Remove any clothing

interfering with the arm

cuff.

Refer to section 3.1.
Make sure that the air

tube is connected

securely.

Refer to section 3.1.
Replace the arm cuff

with a new one.

Refer to Chapter 5.

Apply the cuff correctly

so that it is firmly

wrapped around the arm.

Refer to section 3.1.

Inflate the cuff so that it

is 30 to 40 mmHg above

your previous

measurement result.

Refer to section 3.3.

Unplug the air plug from the air jack.

Gently fold the air tube into the arm cuff.

4.4 Storage

Using the Optional AC Adapter

Insert the AC adapter plug

into the AC adapter jack on

the rear side of the main

unit.
Plug the AC adapter into an

electrical outlet.

Product Description

Model

Display

Measurement Method

Measurement Range

Accuracy

Inflation

Deflation

Memory

Rating

Power Source

Battery Life

Applied Part

Protection Against

Electric Shock

Operating

temperature/ Humidity

Storage temperature/

Humidity/ Air pressure

Console Weight

Cuff Weight

Outer Dimensions

Cuff Dimensions

Cuff/ Tube Material

Package Content

• This device fulfils the provisions of EC directive 93/42/EEC (Medical Device

Directive).

•

This blood pressure monitor is designed according to the European Standard

EN1060, Non-invasive sphygmomanometers Part 1: General Requirements

and Part 3: Supplementary requirements for electromechanical blood

pressure measuring systems.

•

This OMRON product is produced under the strict quality system of OMRON

HEALTHCARE Co., Ltd., Japan. The core component for OMRON blood

pressure monitors, which is the Pressure Sensor, is produced in Japan.

Automatic Blood
Pressure Monitor

Model HEM-7132

Instruction Manual

A. Display

B. Memory button

C. START/STOP button

D. Date/Time setting ( ) button

E. Cuff wrapping guide lamp

F. Up/Down ( ) buttons

G. Blood pressure colour indicator

H. Battery compartment

I. AC adapter jack (for optional

AC adapter)

J. Air Jack

U. Heartbeat symbol

• Flashes during measurement.

V. Date/Time display

W. Movement error symbol

X. Blood pressure level indicator

Y. Deflation symbol

Z. Pulse display and Memory

number

Push or buttons to

change.
Push the button to confirm.

Next setting appears.

If your systolic pressure is more than 210 mmHg

After the arm cuff starts to inflate, press and hold the START/STOP

button until the monitor inflates 30 to 40 mmHg higher than your

expected systolic pressure.
Notes:

• The monitor will not inflate above 299 mmHg.

• Do not apply more pressure than necessary.

Cuff Wrapping Guide Lamp

• If you move during measurement, the movement

error symbol ( ) will appear on the display.

Keep still and repeat the measurement.

Alternating date/time display

Display:

To disconnect the AC adapter, unplug the AC adapter from the

electrical outlet first and then remove the AC adapter plug from the

main unit.

5341879-6A

K. Air plug

L. Air tube

M. Arm Cuff (Arm circumference

22 -

42 cm)

Arm cuff:

AC Adapter S

Arm Cuff

Arm circumference

22 - 42 cm

• Your blood pressure monitor includes an

irregular heartbeat feature. Irregular heartbeats

can influence the results of the measurement.

The irregular heartbeat algorithm automatically

determines if the measurement is usable or

needs to be repeated. If the measurement

The batteries are low.

The batteries are

exhausted.

Air plug disconnected.

Movement during

measurement and the arm

cuff has not been inﬂated

sufﬁciently.

The arm cuff was inﬂated

above 299 mmHg

when inﬂating the cuff

manually.

Movement during

measurement.

Clothing is interfering with

the arm cuff.

Device error.

Irregular heartbeats are

detected.

Remove the arm cuff. Wait

2 - 3 minutes and then take

another measurement.

Repeat the steps in section

3.3. If this error continues to

appear, contact your doctor.

Movement during

measurement.

Carefully read and repeat

the steps in section 3.3.

You should replace them

with new ones ahead of

time.

Refer to section 2.1.
You should replace them

with new ones at once.

Refer to section 2.1.

Insert the plug securely.

Refer to section 3.1.

Arm cuff not applied

correctly.

Apply the arm cuff correctly.

Refer to section 3.1.

Air is leaking from the arm

cuff.

Replace the cuff with the

new one.

Refer to Chapter 5.

Repeat measurement.

Remain still and do not talk

during measurement.

Refer to section 3.3.

If “E2” appears repeatedly,

inﬂate the cuff manually

until it is 30 to 40 mmHg

above your previous

measurement result.

Refer to section 3.3.

Do not inﬂate the cuff above

299 mmHg.

Refer to section 3.3.

Repeat measurement.

Remain still and do not talk

during measurement.

Refer to section 3.3.

Remove any clothing

interfering with the arm cuff.

Refer to section 3.1.

Contact your local OMRON

representative.

Cause

Remedy

Error Display

3. Using the Unit

Insert the air plug into the air jack

securely.

3.1 Applying the Arm Cuff

Remove tight-fitting clothing or tight rolled up sleeve from your

upper arm. Do not place the arm cuff over thick clothes.

Remove the arm cuff.

Press the START/STOP button to turn the monitor off.

The monitor automatically stores the measurement in its memory.

It will automatically turn off after 2 minutes.

Note: Wait 2-3 minutes before taking another blood pressure

measurement. Waiting between readings allows the arteries to

return to the condition prior to taking the blood pressure

measurement.

The cuff wrapping guide lamp lights in green, the cuff is correctly

wrapped tightly enough on the arm and the reading is accurate and

reliable. If it does not light, the reading is not reliable due to the

incorrect wrapping of the cuff. Please wrap the cuff again, taking care

to wrap it correctly and take the measurement again.

Always consult your doctor. Self-diagnosis of measurement

results and self-treatment are dangerous.

Apply the arm cuff to your upper

arm.

Close the fabric fastener

FIRMLY.

• Press the START/STOP button and repeat

measurement.

• If the problem continues, try replacing the

batteries with new ones.

If this still does not solve the problem, contact

your local OMRON representative.

Nothing happens

when you press the

buttons.

Summary of Contents for HEM-7132

Page 1: ...g or eating 30 minutes before taking a measurement Sit on a chair with your feet flat on the floor Sit upright with your back straight The arm cuff should be at the same level as your heart The blood pressure can differ between the right arm and the left arm and therefore also the measured blood pressure values can be different OMRON recommends to always use the same arm for measurement If the val...

Search results

Summary of Contents for HEM-7132

Reviews:

Related manuals for HEM-7132

Brands by name

Popular brands

Omron HEM-7132, Instruction Manual

Search results

Summary of Contents for HEM-7132

Reviews:

Related manuals for HEM-7132

Brands by name

Popular brands