Omron G9SR, Operation Manual

Page: 22 / 106

Operation manual G9SR
XXII
REGULATIONS AND STANDARDS
The G9SR Safety Relays conform to the requirements in compliance with the following
standards:
Certifying body Standards
TÜV SUED
• EN ISO 13849-1:2008
• EN 61508 parts 1-4:2010
• IEC/EN 62061/A1 2013
• IEC 61496-1/A1 2008 Type 4
Others
• CE Marking
• CSA Marking
The G9SR Safety Relays are applicable in applications up to Performance level e.
The hardware is designed according to the requirements for a category 4 system.
Do not use the G9SR Safety Relays in situations where the risk assessment requires
higher values than mentioned in the following table:
Pl e EN ISO 13849-1:2008
Cat. 4 EN ISO 13849-1:2008
Type 4 IEC 61496-1: ed 2 2004
PFHd G9SR-BC 5.7*10 -9 EN ISO 13849-1:2008
PFHd G9SR-AD 5.7*10 -9 EN ISO 13849-1:2008
PFHd G9SR-EX 3.1*10 -9 EN ISO 13849-1:2008
MTTFD G9SR-BC 351 Year EN ISO 13849-1:2008
MTTFD G9SR-AD 379 Years EN ISO 13849-1:2008
MTTFD G9SR-EX 1120 Years EN ISO 13849-1:2008
DCavg 97% EN ISO 13849-1:2008
SIL 3 EN 61508:2010
Proof test interval : 20yr IEC 62061: 2005
MTTR 8h EN61508-1:2008
Type Type B EN61508:2010
HFT 1 EN61508:2010
Using a G9SR Safety Relay enables building a safety control system that satisfies the
following:
• Requirements for SIL 3 (Safety Integrity Level 3) in EN 61508, IEC/EN 62061,
Safety Standard for Safety Instrumented Systems (Functional Safety of Electrical/
Electronic/Programmable Electronic Safety-related Systems)
• Requirements for PLe (Performance Level e)
and for safety category 4 in EN ISO13849-1