Omron G3PW, User Manual

Page: 29 / 120

14
Nomenclature and Operations Section 2-2
2-2 Nomenclature and Operations
Nomenclature
A model with a terminal block with small slotted screws is shown as an exam-
ple.
Indicators
Level Indicators
Monitoring Indicators
Communications Indicator
7-segment display
Monitoring
indicators
Communications
indicator
Control terminal
block
Protective cover
(removable)
Level indicators
Reset/event indicator
LVL Key
UP Key
DOWN Key
ENT/RST Key
Command input and
power supply terminal
block (with cover)
1. 1 to 5-V/0 or 5-V input
2. 4 to 20-mA input
3. Current/voltage input COM
4. 100 to 240 VAC
5. 100 to 240 VAC
Load terminal block
(under protective cover)
100 to 240 VAC
Indicator Description
ADJ
Lit when in the adjustment level.
SET
Lit when in the initial setting level.
EV
Lit when an external contact reset input or an event input is ON.
Indicator Description
%(IN)
Lit when the input value is monitored in the monitor level.
%(DUTY)
Lit when the duty value is monitored in the monitor level.
%(OUT)
Lit when the output value is monitored in the monitor level.
%(PHASE)
Lit when the phase angle is monitored in the monitor level.
A
Lit when the current is monitored in the monitor level.
Indicator Description
COMM
Lit when the serial communications are in progress.