Omron FZ4 Series, User Manual, Page: 515 / 656

7
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ4 User's Manual Controlling/Outputting through Serial Communication (Non-procedure) 513
When processing is not performed normally
(Parameters explanation)
Latency
Specifies the required delay to when the specified command is issued in milliseconds, 100 to
99999.
Command
string
Specifies the command string. (Max: 1024 characters)
(Example)
In case of permission of trigger input when 3000 ms elapses
<Command>
<Response>
UNITDATA or UD
Acquiring processing unit parameters and measurement values
The set parameters and measurement values for the processing units set in the scene currently being
used are acquired.
<Command format>
<Response format>
When processing is performed normally
When processing is not performed normally
Acesst 1.0 6251194