Omron FZ4 Series, User Manual, Page: 236 / 656

4
Using
Tool
234 Using Custom Command FZ4 User's Manual
Outputs all or a part of the program content to the macro console.
List [<Line No. 1>][-<Line No. 2>]
Parameters
None.
Return Value
None.
Description
Outputs the program from <Line No. 1> to <Line No. 2> to the macro console.
Omitting <Line No. 1> and <Line No. 2> will cause the whole program to be output.
If <Line No. 2> is omitted, only <Line No. 1> will be output.
If <Line No. 1> is omitted, the program will be output from the head to <Line No. 2>.
Example
List the entire Macro Program that is currently loaded.
List
Loads the Program into the Controller memory.
Load <File Name.>
Parameters
<File Name.> The program file name of the file to be loaded (character string type).
Return Value
None.
Description
Any program that has been loaded up to that point is deleted.
Always specify an absolute path with the drive name included in "File Name".
Perform this action when the BUSY flag is OFF.
Once a program is loaded with the LOAD command, the internal variables will be initialized.
This means that, even when a custom command has been executed successfully, "ER" will be returned
as the execution result.
Example
Load the "mcrtest.mcr" Program.
Load "/c0/mcrtest.mcr"
Acesst 1.0 6251194