Omron FZ3 Series, User Manual

Page: 230 / 304

7
External
Reference
Tables
228 Measurement FZ3 User's Manual
136 Check digit Set/Get
0: Check digit is not used
1: Check digit is used
137
Number of characters
detected setting
Set/Get CHAR_NUM_MIN to CHAR_NUM_MAX
162
Upper limit of number
of characters detected
Set/Get 0 to CHAR_NUM_MAX
163
Lower limit of number
of characters detected
Set/Get 0 to CHAR_NUM_MAX
164
Judgement
comparison character
string
Set/Get Comparison string used for judgement
300 to 335
Classification
comparison character
string
Set/Get Verification string used for classification
400 Character output flag Set/Get
0: Not output
1 : Output
401 Output device Set/Get
0: RS-232C
1: Ethernet
402 Error output Set/Get Error output flag
403 Error message Set/Get Message output while outputting an error
2D Code+
No. Data name Set/Get Data range
0 Judge Get only
0: No judgement (unmeasured)
1: Judgement result OK
-1: Judgement result NG
6 Decoded character count Get only
Number of characters included in code
detected
7 Decoded character string Get only Character string included in code detected
8 Index Get only
0 to (INDEX_NUM_MAX - 1)
-1: Where there was no match with any of
the index comparison strings,or the index
comparison string has not been set up.
9 Integrated quality Get only 0 to 4
10 Contrast Get only 0 to 4
11 Modulation Get only 0 to 4
12 Fixed pattern damage Get only 0 to 4
13 Decode Get only 0 to 4
14 Axis non-uniformity Get only 0 to 4
15 Grid non-uniformity Get only 0 to 4
16 Correction of error not used Get only 0 to 4
103 Reflect to overall judgement Set/Get
0: ON
1: OFF
120 Code type Set/Get
0:Data Matrix ECC 200
1:QRcode
121
Flag used for special character
judgement
Set/Get
0: '*"? are considered to be wild cards
1: '*"? are considered to be character
strings
Acesst 1.0 6251194