6
M
eth
od
s
fo
rC
on
ne
ctin
g
an
d
C
om
m
un
ica
tin
g
w
ith
E
xte
rn
al
D
ev
ice
s
FZ3 User's Manual
Externally Outputting Data through FTP
193
Setting item
Set value
[Factory
default]
Description
Address setting
●
Obtain an IP address automatically
●
[Use the following IP address]
Set the IP address of the controller.
When "Obtain an IP address
automatically" is selected, the IP
address of the controller will be
automatically obtained.
When "Use the following IP address"
is selected, set the IP address, subnet
mask, and the default gateway
address.
IP address
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.100]
Input the controller IP address.
Subnet mask
0.0.0.0 to
255.255.255.255
[255.255.255.0]
Input the subnet mask address.
Default gateway
0.0.0.1 to
255.255.255.254
[10.5.5.110]
Input the default gateway address.
DNS server
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[10.5.5.1]
Input the DNS server address.
Input/Output setting
Input mode
[Normal]
This item cannot be changed.
Input form
[ASCII]
This item cannot be changed.
Output IP address
a.b.c.d
a: 1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
[0.0.0.0]
Input the output destination IP
address.
Input/Output port No.
0 to 65535
[9600]
Set the port No. to use for data I/O
with the controller.
3.
Tap [OK].
The settings are confirmed and the Ethernet window closes.
Communication Example
This section introduces methods for outputting logging image files using Internet browsers.
When actually performing this operation, it is necessary to create software for extracting data.
1.
Input the controller IP address in the Internet browser.
(The controller default IP address 10.5.5.100 is used as an example here.)
The folders within the controller are displayed.
Acesst 1.0 6251194
