5
Changing
the
System
Environment
112
Setting the System Operation Environment
FZ3 User's Manual
Set value
[Factory default]
Description
●
[Low rotation (Ambient temperature: 0 to +45
°
C)]
●
High rotation (Ambient temperature: 0 to +50
°
C)
Select a fan rotation
speed.
3.
Tap [OK].
Important
●
For the FZ3-3
/FZ3-H3
series, the fan control setting is fixed at low rotation. The setting cannot be
changed to fast rotation.(Fast rotation can be selected on the screen, but the setting will not change.)
Setting the Start-up Status [Startup Setting]
The status for when power is turned on is set here.
Inspection can be set to start immediately after the power is turned on by setting the scene No. of the
scene in which measurement contents are set.
In addition, settings can be done so that the Camera Setting window is not displayed at start-up.
1.
On the Main screen, tap the [System] menu - [Controller] - [Startup setting].
The Startup Setting window is displayed.
2.
Change the settings.
Acesst 1.0 6251194
