![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879237.webp)
Changing the Scene to Change the Line Process
FQ2-S4 User’s Manual
235
7
C
onven
ient Fu
ncti
ons
Creating New Scenes
The default scene number is 0. To create another scene, use the following procedure to switch the scene and
then make the settings.
(Setup
Mode)
−
[Select scene]
Changing Scene Names, Copying Scenes, and Deleting Scenes
(Setup
Mode)
−
[Select scene]
Switching Scenes from an External Device
• Changing Scenes with a Parallel Input Command
• Changing Scenes with a PLC Link Command
• Changing Scenes with an EtherNet/IP Command
• Changing Scenes with a TCP No-protocol Command
• Changing Scenes with a FINS/TCP No-protocol Command
1
Press the number of the scene to change to and then
press [Select].
2
The scene will change. Make the settings for the
scene.
1
Press the number of the scene and then press [Re-
name], [Copy], or [Clear].
2
To change the name, enter a new scene name in 15 al-
phanumeric characters or less.
To copy a scene, press the number of the scene to
copy.
Summary of Contents for FQ2-S4
