Omron FQ2-S/CH Series, User Manual, Page: 48 / 590

Installation
46
FQ2-S/CH User’s Manual
Installing the Touch Finder
Installation Precautions
Install the Touch Finder in the following orientation to allow sufficient heat dissipation.
Do not mount it in the following orientations.
• To improve ventilation, leave space on both sides of the Touch Finder.
The distance between the Touch Finder and other devices should be at least that shown in the following diagram.
• Make sure that the ambient temperature is 50
°
C or lower. If it exceeds 50
°
C, install an cooling fan or an air condi-
tioner and maintain the temperature at 50
°
C or lower.
• To prevent interference by noise, do not mount the Sensor on panels which contain high-voltage devices.
• To keep the level of noise from the surrounding environment to a minimum, install the Sensor and Touch Finder at
least 10 m away from power lines.
Important
15 mm min.
15 mm min.