Omron FQ2-S/CH Series, User Manual, Page: 430 / 590

Functions Related to the System
428
FQ2-S/CH User’s Manual
Initializing the Sensor and Touch Finder
• Initializing the Sensor
(Setup Mode) − [Sensor settings] − [Initialize]
• Initializing the Touch Finder
(Setup Mode or Run Mode)
−
[TF settings]
−
[Initialize]
Restarting the Sensor and Touch Finder
• Restarting the Sensor
(Setup Mode) − [Sensor settings] − [Restart]
• Restarting the Touch Finder
(Setup Mode or Run Mode) − [TF settings] − [Restart]
Checking Versions
• Checking the Sensor Version
(Setup Mode) − [Sensor settings] − [Information]
• Checking the Touch Finder Version
(Setup Mode or Run Mode) − [TF settings] − [Information]
Checking the Touch Finder Battery Level
• Checking the Sensor Version
(Setup Mode or Run Mode) − [TF settings] − [Battery level]
• The battery level is displayed only for a Touch Finder with a DC/AC/battery power supply (FQ2-D31).
• The settings will be lost if the battery runs out while you are making the settings. If the battery level is low,
save the settings and charge the battery immediately.
Important