Omron FQ2-S/CH Series, User Manual, Page: 423 / 590

Convenient Functions for Setup FQ2-S/CH User’s Manual
421
7
Conven
ien
t Fu
ncti
ons
• Saving Images in the Sensor to an SD Card
The images that are temporarily saved inside the Sensor can be saved to an SD card.
(Setup Mode)
−
[Save to file]
−
[Logging] Tab Page
1
Press [Logging image].
2
Select whether to save the most recently logged image or to save all of the data that is logged in
the Sensor.
* Measurement ID is a value equal to the measurement count minus 1. When launching the FQ2, the count starts from zero.
• Saving Images in an SD Card
The image data can be saved in the SD card each time measurements are performed.
(Run Mode) − [Logging]
Logging All Data (File Logging): p. 394
You can also save the data in Setup Mode by using (Display Arrangement)
−
(Log Image Button).
Displaying Image Data
• Images Saved in Internal Sensor Memory
(Setup Mode) − − [Log]
• Image Files in a SD Card
(Setup Mode)
− −
[Logging image file] or [Camera image file]
Display Functions - Displaying a Saved Image: p. 382
Storage location File name
\sensor_name\LOGIMAGE
Img_Scn0**_YYYY_MM_DD-HH_MM_SS(n)_ MeasurementID _ OverallJudge-
mentResult .IFZ*
Example: The following name would be used for files saved at 10:10:21 pm on March
10, 2010.
Img_Scn000_2010_03_10-22_10_21(0)_0000_OK.IFZ