Omron FQ2-S/CH Series, User Manual, Page: 292 / 590

Inspecting with the Edge Pitch Inspection Item
290
FQ2-S/CH User’s Manual
Changing Edge Detection Conditions (Sensors with Monochrome Cameras Only)
You can change the following measurement conditions for Sensors with Monochrome Cameras.
[Inspect] − [Inspection]
−
[Edge Pitch]
−
[Modify]
−
[Details] Tab Page
−
[Meas.parameter]
Reflect in Total Judgment
You can specify whether to reflect the judgment results of an inspection item in the overall judgment.
The Default is to reflect them.
[Inspect]
−
[Inspection]
−
[Add item.]
−
[Edge Pitch]
−
[Details] Tab Page
−
[Output parameter]
Item Parameter Setting Description
Judgment
Parameter
Edge pitch
Range : 0 to 1000
Defaults: Lower: 0
Upper: 1000
Set the range that is to be judged OK for
each parameter.
Average pitch
Range : 0.0000 to 99,999.9999
Defaults: Lower: 0.0000
Upper: 99,999.9999
Max. pitch
(maximum pitch)
Range : 0.0000 to 99,999.9999
Defaults: Lower: 0.0000
Upper: 99,999.9999
Min. pitch
(minimum pitch)
Range : 0.0000 to 99,999.9999
Defaults: Lower: 0.0000
Upper: 99,999.9999
Average width
Range : 0.0000 to 99,999.9999
Defaults: Lower: 0.0000
Upper: 99,999.9999
Max. width
(maximum pitch)
Range : 0.0000 to 99,999.9999
Defaults: Lower: 0.0000
Upper: 99,999.9999
Min. width
(minimum pitch)
Range : 0.0000 to 99,999.9999
Defaults: Lower: 0.0000
Upper: 99,999.9999
Parameter Setting Description
Color to count
・
White (Default)
・ Black
Sets the color of edges to measure.
Mode
・
Standard (Default)
・
Precise
Select the Precise Mode if the pin width or pitch is less
than 2 pixels.
Edge pitch (number of objects)
Pitch
(distance between
center points)
Width