Omron FQ2-S/CH Series, User Manual, Page: 237 / 590

Inspecting with the Shape Search III Inspection Item FQ2-S/CH User’s Manual
235
4
Setting Up Inspect
ions
Obtaining Multiple Results Simultaneously
You can detect all items that satisfy the extraction conditions.
Judgment is performed for all detected results.
[Inspect]
−
[Inspection]
−
[Shape Search III]
−
[Modify]
−
[Details] Tab Page
−
[Meas. Parameter]
• You can change the output form for each measurement value to one of the following settings.
Press [ ] − [Result type] on the right of the display.
Absolute value (Default): The measured coordinates are output.
Relative value: The difference from the reference position is output as coordinates.
• [Display setting]: the following images can be selected.
Measurement image: displays the Measurement image.
Measurement image
＋
Model image (Default): displays the detected Model on the Edge image.
Edge image: displays the Edge image.
Edge image
＋
Model image: displays the detected Model on the Edge image.
Green: Model points matching with Edge image.
Yellow: Model points match with Edge image except for direction.
Red : Model points not matching with Edge image.
1
Press [Sorting method] and select the conditions by
which to sort the detected results.
You can output the results in the sort order that you se-
lected.
Note
You can specify the actual output conditions and count for output-
ting multiple results.
Selecting the results to output: p. 237
Note