Omron FQ2-S/CH Series, User Manual, Page: 169 / 590

Reading with OCR FQ2-S/CH User’s Manual
167
4
Setting Up Inspect
ions
Set or Acquire the Date and Time
Since the Sensor does not have date and time information, setting or acquirement of date and time is
necessary for Calendar Matching function.
Set or acquire the Date and Time by any the following methods.
Set the Date and Time information automatically when TouchFinder is connected to the Sensor.
[Setup] - [Sensor settings] - [Current Day/Time]
• When you re-connect the TouchFinder to Sensor, the day and time information is acquired,
• If one more than Sensors are connected to the TouchFinder, the day and time information of second connected
TouchFinder is enabled.
Set or Acquire the Date and Time using the external device.
Acquires the Date and Time information by sending a command from the external device.
For details, refer to
5-1 Command Control, Command List, and Command to Write Data in FQ2-S/CH User's
Manual for Communications Settings .
1
Touch [Auto-Sync with TF]
2
Touch [ON].
Important