manualshive.com logo in svg

Omron FH-2 Series, Hardware Setup Manual, Page: 53 / 244

Share
Download
Omron FH-2 Series Hardware Setup Manual Download Page 53

2-1-3

FH-L Series

Vision System FH-L series is the small and low-cost BOX type Sensor Controller having functions and
high-speed needed to built into a machine, and safety, reliability, and maintainability as an industrial
controller.
This series can connect with up to four cameras and transmits images faster than that in the conven-
tional models.

cable tor Touch Panel 
interface

Touch Panel Monitor

FH-MT12

special cable for
Touch Panel Monitor

PLC for I/O control

Personal
computer

Lighting

Controllers

External

Lightings

Cameras

Ethernet Cables 

*1

special cable for 

cameras

special cable for I/O

PLC for

I/O control

Vision System 
Sensor Controller

Industrial Switching Hubs for 
EtherNet/IP and Ethernet

Trigger input

sensor

Lighting

Controllers

*1. To use STP (shielded twisted-pair) cable of category 5 or higher for Ethernet and RJ45 connector.

2 Overview of FH series

2-5

FH Series Vision System Hardware Setup Manual (Z366-E1)

2-1
 Overview of System

2

2-1-3

 FH-L Series

Summary of Contents for FH-2 Series





















































































































































































































































Reviews:

No comments