Omron fh-1 series, User Manual, Page: 54 / 882

WWW.NNC.IR
Creating a Scene
52
Vision System FH/FZ5 Series
User’s Manual (Z340)
Creating a Scene
This section explains how to add processing units to a scene.
1
In the Main Window (layout 0), display the scene to edit.
Reference: Changing the Scene or Scene Group (p.60)
2
Click the [Edit flow] button.
The edit flow window is displayed.
3
Select the processing item to add from the processing item tree.
4
Click the [Append] button.
The selected processing item is added at the
bottom of the unit list (flow).
5
Add another processing unit if
necessary. Repeat the steps after 3.
6
Either click the icon of the processing unit to be set or click the [Set] button.
The Properties Tab Page is displayed. Set detailed conditions. The displayed contents depend on the
processing item.
7
Set the conditions.
The displayed contents depend on the processing item.
• Limitations on Settings
The number of image input processing items that can be used is limited.
Reference: About Limits on the Number of Image Input Processing Items Used (p.858)
Note
Property setting buttons