Omron F3SJ-B0185P25, User Manual

Page: 31 / 149

15
F3SJ-E/B
User’s Manual
Chapter
2
Wiring Diagrams
System Configuration and Functions
E

Basic Type (Muting System)
 Minimum wiring required to operate the F3SJ-B
(Wiring for auto reset mode)
 Wiring for muting function
0V
Power
supply
+24 VDC
Emitter
Receiver
(Gray) Communication line (+)
(Pink)
Communication line (-)
Open
Open
Open Open
Open
Open Open Open
Open
24 V (Brown)
External device monitoring input (Red)
0 V (Blue)
Auxiliary output (Y
ellow)
Safety output 1 (Black) Safety output 2 (White)
Shield
Shield
0 V (Blue)
Muting input 1 (white)
Muting input 2 (Red)
T
est input (Black)
Reset input (Y
ellow)
24 V (Brown)
F39-JD A-L F39-JD A-D
24 V (Brown)
External device monitoring input (Red)
*2
0 V (Blue)
Auxiliary output (Y
ellow)
Safety output 1 (Black)
Safety output 2 (White)
Shield
T
e
st input (Black)
*1
Reset input (Y
ellow)
*1
24 V (Brown)
Shield
0 V (Blue)
(Gray) Communication line (+)
(Pink)
Communication line (-)
S1
S2
A1
B1
KM1, KM2
K1 : External test switch
(connect to 0 V if a switch is not required)
: Lockout reset switch (connect to 24 V if a switch is not required)
: Contact by muting sensor A1
: Contact by muting sensor B1
: Safety relay with force-guided contact (G7SA) or magnetic contactor
:
Indicator or PLC, etc. (for monitoring)
S1
B1 A1 S2
K1 KM1 KM2
Emitter
Receiver
Muting input 1 (white)
Muting input 2 (Red)
*1. Used as override input as well.
*2. When muting system is used, connect it to 0 V as the external device monitoring function cannot be used.
*3. Use a switch for small loads (input specifications: 24 V, 3 mA).
*4. F3SJ operates even when K1 is not connected.
F39-JD A-L F39-JD A-D
*3 *3
*4