Omron F3SG-SR Series, User Manual

Page: 144 / 399

116
Chapter
2
Designated Beam Output
F3SG-SR
User’s Manual
System Operation and Functions
2-23. Designated Beam Output
2-23-1. Overview
This function allows information on unblocked/blocked states of a given beam to be output.
Example:
• To turn Area Beam Indicator (ABI) ON when a specified beam of the F3SG-SR is blocked
• To output, from the auxiliary output, a signal of information on a specified beam being unblocked
If one or more specified beams are blocked or unblocked, the information on the beam state can be
provided as an auxiliary output or Area Beam Indicator (ABI).
Operation Example
Designated beam state: Dark-ON
2-23-2. Factory Default Setting
Designated Beam Output is disabled.
2-23-3. Setting with Intelligent Tap
The user cannot make any changes to the settings of this function by the DIP Switch on the Intelligent
Tap.
F3SG-SRA

F3SG-SRB

Safety output ON Safety output OFF Safety output OFF
Designated beam output OFF Designated beam output ON Designated beam output OFF
Figure 1 Figure 2 Figure 3
Designated
beam
Designated
beam
Beam state
Beam state
(Designated beam)
Unblocked
Blocked
(Other than designated beam)
Designated beam output
ON
OFF
Unblocked
Blocked
OSSD
ON
OFF