Omron F3SG-RA, User Manual, Page: 53 / 268

29
F3SG-R
User’s Manual
Chapter
2
PNP/NPN Selection
System Operation and Functions
E
2-5. PNP/NPN Selection
2-5-1. Overview
The F3SG-RA offers PNP/NPN selection for the user to select the polarity of the inputs and outputs of
the receiver between PNP and NPN.
When the system is set to the NPN type, the “NPN” indicator is illuminated.
The PNP/NPN Selection function is not available for the F3SG-RE. Select an F3SG-RE of your preferred I/O type.
2-5-2. Factory Default Setting
The factory default setting is PNP type.
2-5-3. Setting with DIP Switch
The user can select the type from PNP or NPN by the DIP Switch.
Refer to Chapter 3 Setting with DIP Switch for more information on setting this function by the DIP Switch.
2-5-4. Setting with Configuration Tool
The user cannot make any changes to the PNP/NPN selection by the Configuration Tool.
F3SG-RA Series X
F3SG-RE Series