100
Chapter
7
Op
tiona
l Acc
ess
ories
(Sold Sepa
rat
ely)
F3SG-4RA-25-02TS
User’s Manual
Appendix
7-2. Optional Accessories(Sold Separately)
Single-Ended Cable (Oil-Resistant Cable)
Single-Ended Cable (2 cables per set, one for emitter and one for receiver)
*When the accessory is used, protect it from cutting oil.
Double-Ended Cable (for extension) (2 cables per set, one for emitter and one for receiver)
*When the accessory is used, protect it from cutting oil.
Reduced Wiring Connector
*When the accessory is used, protect it from cutting oil.
Appearance
Model
Cable length
Specifications
Emitter
Receiver
F39-JD3RA-L
3 m
Emitter cable (F39-JD
□
RA-L):
M12 connector (8-pin), 5 wires
Receiver cable (F39-JD
□
RA-D):
M12 connector (8-pin), 8 wires
IP67 and IP67G (JIS C 0920 Annex 1)*
rated when mated.
* F3SG-R meets the degree of protection
when it is correctly connected with the
power cable. The degree of protection is
not satisfied with the part where cable
wires are uncovered.
F39-JD7RA-L
7 m
F39-JD3RA-D
3 m
F39-JD7RA-D
7 m
Appearance
Model
Cable length
Specifications
F39-JD3A
3 m
M12 connector (8-pin), 8 wires + Shield
wire
IP67* rated when mated.
F39-JD7A
7 m
F39-JD10A
10 m
F39-JD15A
15 m
F39-JD20A
20 m
Appearance
Model
Cable length
Specifications
F39-JDR5B
0.5 m
M12 connector (8-pin) on both ends
IP67* rated when mated.
F39-JD1B
1 m
F39-JD3B
3 m
F39-JD5B
5 m
F39-JD7B
7 m
F39-JD10B
10 m
F39-JD15B
15 m
F39-JD20B
20 m
Appearance
Model
Remarks
F39-CN5
IP67* rated when mated.
Used for reduced wiring system.
Use this connector in combination with Cables for Reduced Wiring.
Summary of Contents for F3SG-R Series
Page 19: ...xvii F3SG 4RA 25 02TS User s Manual Introduction E 7 4 Revision History 107...
Page 20: ...xviii Introduction F3SG 4RA 25 02TS User s Manual...
Page 52: ...32 Chapter 3 End Cap F3SG 4RA 25 02TS User s Manual Setting with Rotary Switch and End Cap...
Page 112: ...92 Chapter 6 Maintenance Checklists F3SG 4RA 25 02TS User s Manual Checklists...