Omron F3SG-PG Series, User Manual, Page: 86 / 473

56
Chapter
2
Self-Test
F3SG-SR/PG
User’s Manual
System Operation and Functions
2-5. Self-Test
2-5-1. Overview
The F3SG-SR/PG performs the Self-Test when power is turned ON (within 3 s) to check for errors.
Also, it regularly performs the Self-Test (within a response time) while operating.
This function cannot be cancelled.
If an error is found in the Self-Test, the F3SG-SR/PG enters the LOCKOUT state, keeps the safety
outputs in the OFF state, and indicates the error at the same time.
2-5-1-1. Self-Test details
The Self-Test detects such error as described below.
Emitter
• Failure of emitter unit or circuit
• CPU failure
• Memory failure
• Failure of DIP Switch
Receiver
• Abnormal external power supply voltage
• Failure of internal power supply circuit
• Failure of receiver unit or detection circuit
• CPU failure
• Memory failure
• Failure of safety output circuit
• Disconnected or short-circuited cable
• Failure of DIP Switch
• Failure of End Cap
In case of F3SG-PGA-C emitter/receiver, the emitter and receiver in it can respectively detect the above error.
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C 
F3SG-SRB

F3SG-PGA-L

S ub se qu ently performs periodic test
Po w er s u pply
O N
OFF
Self-Test
O N
OFF
3 s max.