Omron F3SG-PG Series, User Manual, Page: 305 / 473

275
F3SG-SR/PG
User’s Manual
Chapter
4
M
onitor
in
g
with
SD M
a
nag
e
r
3
Setting with SD Manager 3
E
4-4-3-4. Power-On Time/Load Switching Frequency
This function can be used only when the F3SG-SR/PG is connected to the Intelligent Tap and a PC.
Select [Power-On Time/Load Switching Frequency from the [Maintenance Information] list in the
[Menu] window.
Then, the screen below is displayed.
* The emitter power-on time is displayed only when the sensor is connected in the Wired Synchronization.
No. Function name Description Initial value Configurable item
1 Receiver power-on
time Shows power-on time threshold, power-on time
and accumulated power-on time for the
receiver.
Only power-on time threshold is configurable. • Power-on time
threshold: 30,000 h
• Power-on time
threshold: 30,000 to
1,000,000 h (in 1-h
increments)/Disable
2 Emitter power-on
time * Shows power-on time threshold, power-on time
and accumulated power-on time for the emitter.
Only power-on time threshold is configurable. • Power-on time
threshold: 30,000 h
• Power-on time
threshold: 30,000 to
1,000,000 h
(in 1-h increments)/
Disable
3 Load switching
frequency Shows load switching frequency threshold,
load switching frequency and accumulated load
switching frequency.
Only load switching frequency threshold is
configurable. • Load switching
frequency threshold:
100,000 h
100,000 to 4,000,000
times
(in 1-time increments/
Disable)
4 Reset Resets power-on time and load switching
frequency to zero.
Resetting is only possible when you are logged
in with the administrator level. - -
5 Save maintenance
information Saves error and warning logs, Intelligent Tap
log, power-on time, accumulated power-on
time, load switching frequency and
accumulated load switching frequency as a
.csv file. - -