Omron F3SG-PG Series, User Manual, Page: 291 / 473

261
F3SG-SR/PG
User’s Manual
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
Setting with SD Manager 3
E
4-3-6. Setting Initialization
This function is usable to bring the settings of each function back to the factory default settings.
Log in at the administrator level and click the icon below on the top page.
The setting screen below is displayed.
4-3-6-1. Initializing F3SG-SR/PG Settings
In order to execute setting initialization, click [Reset to factory default settings].

In a cascade connection of F3SG-SR
Select the channel of the F3SF-SR sensor you wish to bring back to the factory default settings using
the [Target Sensor] button in the top right corner of the screen, and click [Reset to
factory default settings].
To bring all the cascaded channels back to the factory default settings, execute setting initialization for
each channel.

With F3SG-SR/PG connected, updating the backup settings of F3SG-SR/PG
saved in the Intelligent Tap to the factory default settings
Initialize the settings of all the initialization target channels according to the procedure above. Then,
click the [Write] button .
Unless clicking the [Write] button , the backup settings of F3SG-SR/PG saved in the Intelligent Tap are not updated.
In this state, if restarting the F3SG-SR/PG with the Position 1 of the DIP Switch set at ON (Lock), the F3SG-SR/PG is
restored by the settings before initialization.
Even after the settings are returned to the factory default settings, the password which has already been changed is not
returned to initial password “0000.” For the password, refer to
4-2-6. Password Protection .
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C

F3SG-SRB

F3SG-PGA-L
