Omron F3SG-PG Series, User Manual, Page: 271 / 473

241
F3SG-SR/PG
User’s Manual
Chapter
4
Cha
nging Set
tings
with SD
Ma
nag
e
r 3
Setting with SD Manager 3
E
4-3-3-3. Area Beam Indicator (ABI)
First, carry out 4-3-1. Preparing to Change Settings .
Next, on the Top page, click the icon below.
The setting screen below is displayed.
F3SG-SRA

F3SG-PGA-A

F3SG-PGA-C

F3SG-SRB F3SG-PGA-L

No. Function name Description Initial value Configurable value or numerical range
1 Output
operation mode
of ABI Select the operation mode of the area
beam indicator (ABI).
Items 2 to 4 below can be set only
when [Output Information] is
selected.
Block/Unblock
Information Disable/Block/Unblock Information/
Input signal linkage/Output information
2 Output
operation mode
of ABI Select the information/signal
output by ABI.
Red
Safety output
information
For the information assigned to
ABI, refer to Information (Output
operation mode) assigned to Auxiliary
output/Lamp of
4-3-3-1. Auxiliary
Output/Lamp .
Orange
Stable-state
information
Green
Safety output
information
3 Inverted signal
output of ABI
pattern Select Enable or Disable for the
inverted setting of ABI patterns. Red Enable Enable/Disable
Orange Enable
Green Disable
4 ABI output
pattern Select an ABI output pattern. Red Solid-ON Illuminate/ON once/ON twice/ON three
times
Orange ON 1 time
Green Solid-ON