Omron F3SG-PG Series, User Manual, Page: 121 / 473

91
F3SG-SR/PG
User’s Manual
Chapter
2
Mu
ti
ng
System Operation and Functions
E

Basic wiring diagram
2-13-3-2. Installation Example of Exit-Only Muting Mode
This is an installation example of the Exit-Only Muting mode. When using the Exit-Only Muting mode,
install the muting sensors on the hazardous side of the workpiece exit.
This can be used if a workpiece has a certain length and the hazardous side of the workpiece exit has
enough space around it.
1.
Before a workpiece passes through
All muting sensors are turned OFF and the safety function of the F3SG-SR/PG is working.
2.
MUTING started
When the muting sensors A1 and B1 are turned ON in this order, and the MUTING state is enabled. In
this state, the safety function of F3SG-SR/PG is disabled.
+24 V DC
0 V
P N P
N P N
S1 S2
0 V
+24 V DC
S1 S2
24 V /0 V (Bro w n)
MUTE B (Pink)
MUTE A (Gray)
0 V /24 V (Bl u e)
S1, S2: M u ting sensor
24 V /0 V (Bro w n)
MUTE B (Pink)
MUTE A (Gray)
0 V /24 V (Bl u e)
F3SG-SR/
F3SG-PGA-A/-L
recei v er,
F3SG-PGA-C
emitter/recei v er
F3SG-SR/
F3SG-PGA-A/-L
recei v er,
F3SG-PGA-C
emitter/recei v er
W orkpiece
F3SG-SR/PG A1 B1
Hazardo u s zone
A1 : M u ting sensor to b e connected
to m u ting inp u t A
B1 : M u ting sensor to b e connected
to m u ting inp u t B
d1: Distance b et w een A1 and B1
d2: Distance b et w een A1 and F3SG-SR/PG
V
d2
d1
W orkpiece
F3SG-SR/PG A1 B1
Hazardo u s zone
V