22
SECTION 2
Co
mp
on
en
t Nam
es an
d Fu
nc
tio
n
s
F250
Setup Manual
SECTION 2
Installation and Connections
Component Names and Functions
Pin
Name
Function
1
RS-232C/RS-422 Connector
Connects the Controller to an external device such as a personal
computer or PLC.
2
Ethernet Connector (10BASE-T)
Connects the Controller to a personal computer.
3
Monitor Connector
(S-VIDEO Output)
Connects to a monitor with an S-VIDEO input.
4
Monitor Connector
(Composite Video Output)
Connects to a monitor.
5
Memory Card Slots 0 and 1
Memory Cards such as the Application Software Memory Card can be
inserted in these slots.
6
Memory Card Indicators 0 and 1
Lit when power is being supplied to the corresponding Memory Card.
(The Memory Card must not be inserted or removed when this indicator
is lit.)
7
Console Connector
Connects the Controller to a Console.
8
ERROR Indicator
Lit when an error has occurred.
9
RUN Indicator
Lit while the Controller is in Run Mode.
10 POWER Indicator
Lit while power is ON.
11 Parallel Connectors 0 and 1
Connect the Controller to external devices such as a sync sensor or
PLC.
12 Camera Connectors 0 to 3
Connect to the Cameras.
13 Ground Terminal
Connects to the ground wire.
14 Power Supply Terminals
Connect to the DC power supply.