![background image](http://html1.mh-extra.com/html/omron/f160-vision-sensor/f160-vision-sensor_operation-manual_741258062.webp)
53
Position
Section 3-3
3-3-2
Setting Inspection Details
1.
Decide whether or not to specify physical units for the OK item range.
CHECK
This screen will not be displayed if the coordinate system, has already
been set in another inspection region.
If Yes is Selected
Set the range for OK items in physical units. Go to step (2.)
If No is Selected
Set the range for OK items in pixel units. Go to step (5.)
The following explanation of how to align the coordinate scale with the di-
mensions of the workpiece will use a workpiece on an angle as an exam-
ple.
2.
Align the origin of the coordinates (0) with the left corner or other part of
the workpiece that will serve as the origin for the physical units.
Up/Down and Left/Right Keys: Move the origin (0).
SHIFT + Up/Down or Left/Right Keys: Move the origin quickly.
ENT Key: Sets the position.
Yes
Back
No
Do you want to set the
range in physical units?
0.Scn 0 =SET= Region
0.Position
20 mm
o
286 pixels
0.Scn 0 =SET= Region
Set coordinates
Set the position
of the origin.
O
100.0
X
Y
-100.0
100.0
X=109
Y=326
↑
↓←→
:Change ENT:Set ESC:Back
Summary of Contents for F160 Vision Sensor
