Omron E3X-CIF11, Operation Manual

Page: 57 / 138

46
Setting, Monitoring, and Operating Sensors from the DeviceNet Configurator Section 2-7
2-7-2 Setting the Communication Unit and Sensors, and Downloading
Use the following procedure to set the Communication Unit and each Sensor.
1,2,3... 1. Select and double-click the applicable Communication Unit to display the
following Edit Device Parameters Dialog Box.
2. Edit the parameters.
Communication Unit Settings
Under Unit Settings, set the number of Sensors connected in the Number
of Sensors Field and the number of Units monitoring incident light in the
Incident Light Monitoring Units Field.
Sensor Settings
a) Under Sensor Structure, select the field to the right of the relevant Sen-
sor number (Sensor #
@
, where the box is the unit number), click the
down arrow, and select the Fiber Amplifier Unit model number from the
pull-down menu.