Omron E3X-CIF11, Operation Manual

Page: 16 / 138

5
Specifications Section 1-2
1-2 Specifications
1-2-1 Performance Specifications
Note 1. Fiber Amplifier Units that are allocated two unit numbers must be counted
as two Units when counting the number of connected Sensors.
2. Prewired models (E3X-DA11/21/41/51-N, E3X-DAB11-N, etc.) and water-
resistant models cannot be used. Connecting these Units will disable the
power reset switch.
Item Specification
E3X-DRT21 E3X-SRT21 E3X-CIF11
Communications method DeviceNet CompoBus/S RS-422
Communications Remote I/O
communications
ON/OFF data, status, and monitoring inci-
dent light levels
(Functions as DeviceNet slave.)
ON/OFF data and
status
(Functions as Com-
poBus/S slave.)
No
Messages com-
munications Explicit messages No Functions as
CompoWay/F
slave.
Setting, moni-
toring, and
operating Sen-
sors from Con-
figurator Supported from DeviceNet Configurator
(depends on the parameter editing and
device monitoring functions of the slave). No No
Mobile Console connection Yes
Cannot be used at the same time as moni-
toring incident light levels from remote I/O
communications, using explicit messages
communications, or setting, monitoring, or
operating Sensors from the Configurator. --- Cannot be used
at the same time
as CompoWay/F
message com-
munications.
Power supply (Shared by Commu-
nication Unit and all Fiber Amplifier
Units connected to it.) From DeviceNet communications connec-
tor From CompoBus/S
communications
connector From power sup-
ply cable
Maximum number of Sensors that
can be connected per Unit.
(See note 1.)
13 or 16 (depending on the mode used) 6 or 14 (depending
on the setting for
maximum number
of Sensors) 16
Applicable Fiber Amplifier Units The following Fiber Amplifier Units with Connectors are supported (See note 2.):
E3X-DA6
E3X-DAB6
E3X-DAG6
E3X-DA6TW
E39-TM1
E3X-DA6-P
E3X-DA8
E3X-DAB8
E3X-DAG8
E3X-DA8TW
Applicable Slave Connectors for
Fiber Amplifier Units E3X-CN02 Cordless Slave Connector only E3X-CN02 Cord-
less Slave Connec-
tor only E3X-CN12 Slave
Connector with
Cord or E3X-
CN02 Cordless
Slave Connector
Power supply cable None None Provided.