Omron E3NW-CCL, User Manual

Page: 109 / 118

A - 29
A Appendices
E3NW-CCL CC-Link Digital Sensor Communications Unit User’s Manual (E431)
A-
4 Usin
g t
h
e Dis
tribu
ted
Se
nso
r U
n
it
A
A-4-5
Gene
ral S
pecifications o
f the Distr
ibu
ted Sensor Unit
Connect a cable from the Unit power supply (24 VDC) to the power supply connectors on each
Distributed Sensor Unit.
Securely attach ferrules to the Unit power supply cable wires.
 Recommended Parts
We recommend using the following ferrules for the Unit power supply cable.
We recommend the following screwdriver for the removal of ferrules.
The following table gives the general specifications of the E3NW-DS Distributed Sensor Unit.
Connecting the Unit Power Supply
Model number Applicable wire size Crimp tool Manufacturer
AI0,5-10WH
0.5mm
2
/AWG20
CRIMPFOX UD6 (product
No. 1204436) or
CRIMPFOX ZA3 Series
Phoenix Contact Co., Ltd.
H0.5/16 orange
0.5mm
2
/AWG20
Crimper PZ1.5 (product
No. 900599)
Weidmueller Japan Co., Ltd.
Model number Manufacturer
XW4Z-00C OMRON Corporation
A-4-5 General Specifications of the Distributed Sensor Unit
Item Specifications and Performances
Unit power supply voltage 24 VDC (20.4 to 26.4 V)
Maximum connectable
Sensors
10
Power and current
consumption 2 W max. (Not including the power supplied to Sensors.), 80 mA max. (Not including
the current supplied to Sensors.)
Noise immunity Conforms to IEC 61000-4-4, 1 kV (power supply line).
Vibration resistance
10 to 60 Hz with a 0.7-mm double amplitude, 50 m/s
2
at 60 to 150 Hz, for 1.5 hours
each in X, Y, and Z directions
Shock resistance
150 m/s
2
for 3 times each in X, Y, and Z directions
Dielectric strength 500 VAC at 50/60 Hz for 1 min
To 24-VDC Unit
power supply
Unit power
supply cable
Ferrule
+V terminal
−
V terminal