E3X-DA-S/E3C-LDA Series
High-speed, High-resolution
Analog Output Meets a Wide
Range of Applications
Features
Analog Output Models
Analog Control Output
Outputs at a voltage of 1 to 5 V depending on the incident
light level (digital display). Applicable to position control,
height distinction, and a variety of other applications.
High Speed, High Precision
Select the detection mode that best suits the application. High-
speed response of 80
µ
s (super-high-speed mode) enables use
when high-speed positioning is required.
Stabilizing APC Function
The built-in APC function monitors and controls the light emission
intensity. This helps to minimize fluctuating emission levels caused
by degradation of the emitter.
Easy Settings
Make settings easily and precisely while checking them on the
digital display. Use the Power Tuning function to make satura-
tion and other sensitivity adjustments with the press of a but-
ton.
E3X-DA
@
AN-S
Digital Fiber Amplifier
E3C-LDA
@
AN
Photoelectric Sensor
with Separate Digital
Amplifier (Laser-type)
Light emission intensity
Time
Without APC circuit
Press
To about 1/25
To about 5x
ON/OFF
Analog
Tablet height distinction
Sheet meandering
Position control, height distinction, and other applications with analog output.
Select the detection mode (response speed, as high as 80
µ
s) to suit the application.
Easy, one-touch sensitivity setting with the Power Tuning function.
■
■
■
N E W
