![background image](http://html1.mh-extra.com/html/omron/dst1-id12sl-1/dst1-id12sl-1_operation-manual_743063083.webp)
59
Editing Parameters
Section 3-1
3-1-2
Parameter Groups
DST1-series Safety I/O Terminal parameters are classified into groups as
shown in the following diagram.
• Double-click a group name or click the icon to display or hide that group.
• Parameter settings for a particular terminal can be batch copied to the
parameters for another terminal.
The
Copy Group
Button is enabled when a group name is selected and a
group with a different terminal number but similar parameters exists, e.g.,
when safety input 0 is selected and safety input 1 or safety input 2 exists.
Click the
Copy
Group
Button to display the Group Copy Dialog Box shown
below.
The source and destination groups will be displayed. Select the desired
destination groups and then click the
OK
Button. The parameters will be
copied.
• Parameter names with [S] in front of them are related to the safety appli-
cation.
• The size of the Edit Device Parameters Window can be changed.
Summary of Contents for DST1-ID12SL-1
