![background image](http://html1.mh-extra.com/html/omron/dst1-id12sl-1/dst1-id12sl-1_operation-manual_743063029.webp)
5
Standard Models
Section 1-2
1-2
Standard Models
As shown in the following tables, the DST1 Series consists of Input Terminals,
I/O Terminals, and Logic Terminals.
1-2-1
Input Terminals and I/O Terminals
Note
Each test output can be set to function as a test output or a standard output.
Test outputs are used in combination with a safety input. Broken wires in an
external indicator can be detected for terminal T3 only.
1-2-2
Logic Terminals
Note
(1) Each test output can be set to function as a test output or a standard out-
put. Test outputs are used in combination with a safety input. Broken
wires in an external indicator can be detected for terminal T3 only.
(2) Use Network Configurator version 2.0 or higher to set the DST1-
XD0808SL-1.
Model
I/O capacity
Safety
inputs
Test outputs
Safety outputs
Semiconductor
outputs
Relay
outputs
DST1-ID12SL-1
12 inputs
4 outputs
(See note.)
-
-
DST1-MD16SL-1
8 inputs
4 outputs
(See note.)
8 outputs
-
DST1-MRD08SL-1
4 inputs
4 outputs
(See note.)
-
4 outputs
Model
I/O capacity
Safety
inputs
Test outputs
Safety outputs
Semiconductor
outputs
Relay
outputs
DST1-XD0808SL-1
8 inputs
4 outputs
(See note 1.)
8 outputs
-
Summary of Contents for DST1-ID12SL-1
