Omron CS1W-HCA12-V1, Operation Manual

Page: 37 / 254

17
Models and System Configurations
Section 1-2
Programming Devices
The CX-Programmer versions that can be used with the Customizable
Counter Unit are given in the following table.
Note There are some functional limitations in using the CX-Programmer
with the Customizable Counter Unit. Refer to
3-4 Programming De-
vices for details.
The Programming Consoles that can be used with the Customizable Counter
Unit are given in the following table.
Connecting Contact and Special I/O
Special connectors are required to connect the contact I/O and special I/O to
the connectors on the Customizable Counter Unit. These connectors are pro-
vided with the Customizable Counter Unit and can be purchased separately.
The cables for these connectors must be provided and wired to the connec-
tors by the user. An OMRON Connector–Terminal Block Conversion Unit can
also be used for the special I/O. Refer to
3-3 Wiring for details.
Name Model number Computer Serial communications
mode
Model setting on the
CX-Programmer
CX-Programmer
Ver. 1.2 or later
(on CD-ROM) WS02-CXPC1-E IBM PC/AT or compatible
OS: Microsoft Windows
95 or 98
Peripheral bus CQM1H-CPU61
Model number Cable
C200H-PRO27 CS1W-CN224 or CS1W-CN624 required separately.
CQM1-PRO01 2-m cable provided with Programming Console, but CS1W-N114
required separately.
CQM1H-PRO01 2-m cable provided with Programming Console