Omron CPM2C-S100C, Operation Manual, Page: 56 / 269

34
Specifications Section 2-1
2-1 Specifications
2-1-1 General Specifications
Note The above figure for power consumption includes the power consumption of
the Programming Console and Adapter Unit (CIF
@@ ).
2-1-2 Characteristics
Item Specifications
CPM2C-S100C-DRT
CPM2C-S110C-DRT CPM2C-S100C
CPM2C-S110C
Internal power supply voltage 20.4 to 26.4 VDC (24 VDC
−
15% to 10%)
Communications power supply
voltage 11 to 25 VDC (supplied by communica-
tions connector) ---
Power con-
sumption Internal power
supply 4 W max. (See note.) 3 W max. (See note.)
Communica-
tions power sup-
ply 30 mA max. ---
Inrush current 25 A max.
Insulation resistance 20 M
Ω
min. (at 500 VDC) between insulated circuits
Dielectric strength 2,300 VAC for 1 min (between insulated circuits)
Noise immunity Conforms to IEC61000-4-4; 2 kV (power lines)
Vibration resistance 10 to 57 Hz, 0.075-mm double amplitude, 57 to 150 Hz, acceleration: 9.8 m/s
2
in X,
Y, and Z directions for 80 minutes each (Time coefficient; 8 minutes
×
coefficient fac-
tor 10 = total time 80 minutes)
Shock resistance 147 m/s
2
three times each in X, Y, and Z directions
Ambient temperature Operating: 0 to 55
°
C
Storage: –20 to 75
°
C (except for the battery)
Humidity 10% to 90% (with no condensation)
Atmosphere Must be free from corrosive gas
Power interrupt time 2 ms min.
Item Specifications
Control method Stored program method
I/O control method Cyclic scan with direct output (Immediate refreshing can be performed with IORF(97).)
Programming language Ladder diagram
Instruction length 1 step per instruction, 1 to 5 words per instruction
Instructions Basic instructions: 14
Special instructions: 105 instructions, 185 variations
Execution time Basic instructions: 0.64
µ
s (LD instruction)
Special instructions: 7.8
µ
s (MOV instruction)
Program capacity 4,096 words
Maximum I/O capacity 362 points
CPU Unit only: 10 points
Expanded system: + 96 points (three 32-point Expansion I/O Units)
CompoBus/S: + 256 points
Input bits 160 bits: IR 00000 to IR 00915 (Bits not used for input bits can be used for work bits.)
Output bits 160 bits: IR 01000 to IR 01915 (Bits not used for output bits can be used for work bits.)
CompoBus/S input bits 128 bits: IR 02000 to IR 02715 (Bits not used for CompoBus/S input bits can be used for work
bits.)
CompoBus/S output bits 128 bits: IR 03000 to IR 03715 (Bits not used for CompoBus/S output bits can be used for
work bits.)
Work bits 672 bits: IR 02800 to IR 02915, IR 03800 to IR 04915, and IR 20000 to IR 22715