3-1
Work Flow
The procedures for connecting the Controller and Sinusoidal Encoder are shown below.
3-2 Controller Setting Preparations on page
Perform the Controller setting preparations.
▼
3-2-1 Creation of a New Project
▼
3-2-2 Controller Initial Setting
▽
3-3 Sinusoidal Encoder Wiring on page 3-6
Perform wiring for each device.
▽
3-4 Various Controller Settings and Checking
Perform the Controller settings and opera-
tion check.
3 Sinusoidal Encoder Connection Procedure
3-2
CK3M-series Startup Guide Sinusoidal Encoder (O048)
