3-4
Setup of the Motors and Encoder
3-4-1
Wiring of Devices
The figures below show how to wire the CK3M to the Servo Drive and linear motors.
• Wiring of the X axis
S8VK-S12024
CDHD-0032APB0
a
b
c
INC-5723, LIDA48
CK3W-AX2323
£
CK3W-GC2200
• Wiring of the Y axis
S8VK-S12024
CDHD-0032APB0
a
b
c
INC-5716, LIDA48
CK3W-AX2323
£
CK3W-GC2200
Connect the sections a, b, and c in the above figures as follows.
a. Connection between the Controller and the servo amplifier
Connect the amplifier connector of the CK3W-AX2323
£
to the C2 connector of the servo amplifier
with the following dedicated cable.
Manufacturer
Name
Model
Length
OMRON
Direct PWM Cable CK3W-CAAD009A 0.9 m
CK3W-CAAD018A 1.8 m
CK3W-CAAD036A 3.6 m
3 Connection Procedures
3-21
Application Guide Laser Application (O052)
3-4
Setup of the Motors and Encoder
3
3-4-1
Wiring of Devices
Summary of Contents for CK3M-CPU 1 Series
