Omron CJ1W-FLN22, Operation Manual, Page: 78 / 277

Allocated Words in the CIO Area Section 4-3
52
4-3-1 Unit Control Bits (CPU Unit to FL-net Unit)
FL-net Unit operation is started by turn control bits ON and OFF.
4-3-2 Internode Test Destination Address (CPU Unit to FL-net Unit)
Set the remote node address for the internode test in hexadecimal.
4-3-3 Internode Test Monitoring Time (CPU Unit to FL-net Unit)
Set the time period, in the ranges shown below (in units of 10 ms, hexadeci-
mal), to wait for a response in the internode test.
0000 (Hex): 2 s
0001 to FFFF: 0.01 to 655.35 s
n+23
n+24
n+25
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
n
− − − − − − − − − − − − − −
FA Link Connection Start Bit
Internode Test Start Bit
Bit Bit name Status Manipulated by Unit operation
0 FA Link Connection
Start Bit ON User Connects to network
when turned from OFF
to ON.
OFF User Disconnects from net-
work when turned from
ON to OFF.
1 Internode Test Start Bit ON User Executes internode
test while ON.
OFF User
Unit
Stops internode test.
Test completed (255
times).
2 to 15 (Not used.) --- --- ---
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
n+1
Remote node address
0000 to 00F9 (Hex)
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
n+2
Response monitoring time
0000 to FFFF (Hex)