3 Data Exchange with the CPU Unit
3-16
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
Name of device variable for
CJ-series Unit
Type
R/W
Area
Function
*_Sw1CycleTmTmpSet
BOOL
RW
Temporary
Setting
Switch for
Communi-
cations
Cycle Time
<Operation specifications>
FALSE
→
TRUE:
Reads setting data from
*_CommCycleTmCfg
(Communications
Cycle Time Setting) and temporarily
changes the communications cycle time.
Use this to temporarily extend the commu-
nications cycle time to place priority on
message communications.
Note
You can change the cycle time in
any CPU Unit operating mode.
FALSE:
Returns to FALSE after the communica-
tions cycle time is changed.
*_CycleTmRefTblSta[0]
to
*_CycleTmRefTblSta[3]
(Communica-
tions Cycle Time Reference Table) will be
cleared before the switch returns to
FALSE if the change was successfully
completed.
*_CycleTmRefTblSta[0] to
*_CycleTmRefTblSta[3] (
Communica-
tions Cycle Time Reference Table
) will be
cleared before the switch returns to
FALSE if the change was successfully
completed.
Note
*_Mstr1CycleTmSetErr
(Communi-
cations Cycle Time Setting Failed)
will change to TRUE if there is a set-
ting error, and the Communications
Cycle Time Reference Table will not
be cleared.
Default: FALSE
Summary of Contents for CJ1W-DRM21
Page 12: ...Manual Structure 10 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 ...
Page 42: ...Revision History 40 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 ...
Page 345: ...Index 1 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 I Index ...
Page 349: ......