5
Specifications and Characteristics
Section 1-3
• Directly connecting the wires by soldering them to the external connector.
• Indirectly connecting the wires by connecting them to screwless terminals
on an XW2G-40G7-E Input Terminal Block Unit. This Input Terminal Block
Unit allows connection of Line Driver or 24 V Encoder signals. The
XW2G-40G7-E is connected to the Unit via standard available OMRON I/
O-cables (XW2Z-xxxK).
• Indirectly connecting the wires by connecting them to screw terminals on
a standard XW2B-40G4, XW2B-40G5 or XW2D-40G6 OMRON Terminal
Block Unit, i.e. the Terminal Block Unit is connected to the Unit via stan-
dard available OMRON I/O-cables (XW2Z-xxxK).
Refer to section
2-3-2 Connector Wiring Methods
1-3
Specifications and Characteristics
1-3-1
General Specifications
Note
1.
The maximum number of Units per Rack also depends on the maximum
supply current of the Power Supply Unit and the current consumption of
other Units on the Rack.
2.
The CJ1W-CTL41-E Special I/O Unit allocates space for 33 words in the
Special I/O Unit (CIO) Area (refer to section
3.
For a CJ1W-CTL41-E Special I/O Unit the same space as for 4 Units in the
Special I/O Unit DM Area are reserved. However, only the first 90 words
are used to make the DM-settings. The remaining 310 words can be used
as work-words (refer to section
).
Item
CJ1W-CTL41-E
Unit type
CJ-series Special I/O Unit
General Specifications
Conform to general specifications for SYSMAC CJ-series
Operating Temperature
0 to 55
°
C
Storage Temperature
-20 to 70
°
C
Humidity
10% to 90% without condensation
Internal Current Consumption
320 mA (at 5 V)
Dimensions (mm)
31 x 90 x 65 (W x H x D)
Weight
100 g
Mounting Position
CJ-series CPU Rack or CJ-series Expansion Rack
Maximum Number of CTL41-E
Units per Rack
Equal to the number of slots of the Rack (see Note 1)
Maximum Number of CTL41-E
Units per basic CJ PLC
24
Data Exchange with CPU Unit
• I/O Refresh Data Area: CIO-words 2000 to 2959. See Note 2.
• Special I/O Unit DM-Area: D-words 20000 to 29599: 90 DM-words per Unit are
transmitted from the CPU to the Unit at Power Up or when the Unit is restarted.
See Note 3.